Bag Filters M5 / M6

Fine grade Multi-Pocket Bag Filters developed for those buildings where preservation of the decor and high technology equipment is important. With these M5/M6 bag Filters, most mould spores, pollens and general dust will be removed from the air. Typical applications would be shopping malls, restaurants, gymnasium, food stores, schools and engineering workshops

Multi-Pocket Bag Filters type AB45 and AB65 (Grades M5 & M6 to BS EN779 2012)

Fire Retardant to 'Class 1' and can be manufactured to any given size (certain limitations apply), to suit

The 20mm header frames are fitted as standard, but other sizes are available at no extra cost

Additional Information

Technical Information

Data Sheets

Specification

Please Note:
With all high-efficiency Bag Filters, it is important that the bags are installed with the pockets running vertically from top to bottom. This allows the pockets to fully inflate and operate efficiently. Failure to install in this way will result in higher pressure loss, uneven filtering through the pocket length, increased energy usage and a much-reduced filter life span. Therefore, please ensure that you nominate height and width dimensions of your Multi-Pocket Bag Filters when ordering your Bag Filters

Typical Technical Data

Filter Type	Nom. Size	Grade	Rated Airflow	Initial Pd	Final Pd
AB45	600x600x381*	M5	0.66 m³/s	40 Pa	250 Pa
AB65	600x600x381*	M6	0.66 m³/s	46 Pa	250 Pa

* 8 Pocket filter